KIT complet point d'ancrage agile - Structures en béton

€246,18
Taxes incluses

Longueur de corde semi-statique
Informations sur cet article

Everything you need to install a certified movable anchor point. 

It will allow you to install acrobatic and aerial dance equipment in a matter of seconds, safely and without the need for ladders and scaffolding.

This kit is designed to be installed into concrete structures (walls and ceiling).

KIT CONTENTS:

NO. 3 ANCHOR PLATES WITH ANCHOR BOLTS

NO. 2 PULLEYS

NO. 2 OVAL STEEL CARABINERS WITH RING NUT CLOSURE

No. 2 OVAL QUICK LINKS MEASURE 8 mm

No. 1 BALLAST BAG TO BE  FILLED WITH 2/3 kg OF SAND OR GRAVEL

No. 1 SEMI-STATIC ROPE D. 10.5 mm WITH CERTIFIED SEWN LOOP

The length of the rope must be specified at the time of purchase. To determine the correct length of the rope, it is good practice to multiply the height of the anchor point from the ground by 2 and add its distance from the wall to which the ground plate is attached: A x 2 + B.

Description

Nous tenons à rappeler que de nombreuses figures dynamiques réalisables sur les équipements d'acrobatie aérienne peuvent générer une charge de traction allant jusqu'à 10 fois le poids corporel de l'athlète. Créer un point d'ancrage sûr et fiable est non seulement indispensable pour votre sécurité, mais vous permet de pratiquer vos disciplines préférées sans inquiétude et donc de manière totalement gratifiante et productive.

AVIS IMPORTANT

BLL (charge de rupture) et WLL (charge maximale de travail) de la plaque d'ancrage :

BLL 30 kN = environ 3000 kg

WLL 40 daN = environ 400 kg

Facteur de sécurité 7

EN CAS D'INSTALLATION DE LA PLAQUE EN UTILISANT DES VIS POUR POUTRES EN BOIS, LES VALEURS RELATIVES AU BLL ET WLL DES 3 VIS CORRECTEMENT INSTALLÉES DANS LES POUTRES EN BOIS SONT LES SUIVANTES :

BLL 15 kN = environ 1500 kg

WLL 20 daN = environ 200 kg

Facteur de sécurité 7